Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening.
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts.
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts.
For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts.
Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings.
Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 degree point angle size 3/32" to 1/2". On chuck alignment for simplified sharpening process.
1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs.
Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels.
Multi position grinding head with belt that conforms to cutting edge of any knife or tool, appropriate angle for specific knives. Flexible abrasive belts in multiple grits, creates a taper grind. Includes: Work Sharp Power Platform, belt sharpening module, kitchen knife guide, outdoor knife guide, abrasive belt kit: (P80 coarse, P220 medium, 6000 fine honing, quick start guide and instructional DVD.
The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench.
Cuts wood, metal, plastic, aluminum and ceramic tile with ease. Sets up in seconds. Weighs only 13 lbs. 5.5 amp motor; 2,800 spm. 3/4" stroke length using a "T" shank jig saw blade. Includes blade holder, (5) T-shank assorted blades and allen key.
Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop.
15 amp, 4 hp, 3,800 rpm motor with replaceable brushes provides power and durability. Quick-release material clamp allows for easy material cutting and removal. Cutting fence with miter adjustment allows up to 45 degree angles to be cut. Spark deflector provides safety and clear line of sight for cutting. Heavy duty steel base provides stability while cutting. Spindle lock for easy blade changes. 8' power cord. Weighs 32 lbs. 120 volts. 1" arbor size. Max Capacity (Round) 4-3/4" x 5-1/3".
The model 500x is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits including split points and masonry bits. With its popular "push to stop" design, the 500x splitting port won't allow your point to be over split. Ideal for a serious DIYer, hobbyist and the professional drill bit user who sharpens frequently and who works in wood and metal. The large bit and reverse twist (left hand) chucks increase this models already powerful capacities.
For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8". Use replacement blade 5542840
The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench.
Powerful 15 amp motor with 1.2 amp no load speed makes this a great machine for the workshop or the jobsite. Throat depth=16"; Stroke=4/5"; Cutting depth=2"; Table bevel =0-45 degrees left; Weight: 30.8 lbs; Dust blower; Dust port; Blade guard; Variable speed. Accessories include ; Blade guard; Blade holder; Allen key; 2 blades:(1) 15 TPI;(1) 18TPI;
Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs.
Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder.
This chop saw for metal is a powerful tool to have with the strength and grit to get the job done. Goes from truck to jobsite and back without adding strain to your day. Designed with a large 11" x 18-1/2" base for dependability and stays tough to make jobs easier. The versatile "D" handle gives you comfort and control cut after cut. Portable and lightweight at only 34 lbs.
Permanent magnet motor produces consistent power. Push to Stop feature will not allow you to over split the bit point, adjustable material take-off, replaceable diamond sharpening wheel. Custom Point angle sharpening, choose any angle from 115 degree to 140 degrees. One chuck sharpens all sizes, 3/32"-3/4", HSS, carbide, cobalt, TiN-coated and masonry bits. Includes: professional hard shell carrying case.
Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26" x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick.
15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs.
Aluminum working table with blade guide adjustment, work light and blade quick tension adjustment. Max cutting depth=3-1/8"; Throat depth=9"; Table Size=11-13/16" x 11-13/16"; Table Bevel=0-45 degree. Accessories include: Parallel Guide; Miter Gauge; Hex key. 59-1/2" blade included.
Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs.
10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench.
A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench. Rental.
2/3 HP induction motor for dependable performance. 5-speed setting for best results in metal, wood or plastic. Rack and pinion table height adjustment. 2" spindle travel; 1/2" chuck. Table bevels 0 to 45 degrees left and right. Keyed safety switch prevents accidental starting. Includes 1 chuck key and 1 allen key. Weighs 55.5 lbs.
Aluminum work table with dust port, adjustable belt tension, quick sanding belt changing. Specs: disc speed-3450/min, belt speed-1700/SFM, table tilt range-0-45degrees, table size-8-29/32" x 6-5/16", belt table tilt range-0-90 degrees. Includes: 45 degree miter gauge, Allen key, belt sander/disc sander.
Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench.