Ultra small 4-in-1 pocket screwdriver is the same size and shape as a pen complete with a pocket clip. Capped for safety, this tool has 2 interchangeable chrome vanadium blade ends totaling 4 screwdrivers. Used by mechanics, technicians, hobbyists and do it yourselfers. Includes: 1/16", 1/8" Slotted tip and #1, #100 cross point tip. Shelf Pack in Display Box.
The convenience of a set of precision drivers in a one pocket tool. Non-slip textured surface has slip, crack and peel resistance. Magnetic bits attract and hold small screws. Soft and comfortable bi-material grip; Includes tip sizes: 5/32", 1/8", 1PT, 2PT.
Chrome plated bar resists corrosion, interchangeable bars maximize versatility, and slip-resistant rubber grip. Includes one each: #1, #2 Phillips, 3/16", 1/4" Slotted, 1/4", 5/16" nutdriver.
High torque 3-sided Code Blue grips; swap easily between 6 different tips. Use tips, #1, #2, 3/16", 1/4", for slotted screws; use tips #1, #2, for Phillips screws, nutdriver, 5/16", 1/4".
Four in one screwdriver with hi-torque fiberglass, reinforced nylon construction; electronically safe; UL tested at 2,000 volts; rare earth magnet retains both bits and screws. Includes (2) Phillips and (2) slotted standard power bits all retained in the handle; counter display carton.
Magnetic shank holds bits securely in place. Ergonomic ProTouch grip provides maximum torque, comfort, and slip resistance. Internal storage keeps bits locked in place and close at hand. Includes: (1) 1/4" nut setter, (3) torx T15, T20, T25, (2) #1, #2 Phillips, 1/4", 3/16" slotted.
Magnetic shank holds bits securely in place. Ergonomic ProTouch grip provides maximum torque, comfort, and slip resistance. Internal storage keeps bits locked in place and close at hand. Includes: (3) 1/4", 3/8", 5/16" nut setters, (2) torx #1,#2, (2) Phillips #1, #2, (2) slotted 1/4", 3/16".
Easy twist screw chuck holds blade securely in place, fingertip swivel head for greater control, 5 heat treaded blades, ergonomic handle for rapid rotation, greater comfort and control; precision screwdriver for mechanics, technicians, jewelers and do-it-yourselfers. Includes one each: 1/16", 5/64" and 3/32", Slotted Tips are #00 Cross Point Tip and T-6 Torx Tip..
Features the patented Milwaukee "ECX" bit for electrical fasteners, which prevents bit wear and extends bit life when fastening specialty screws commonly found in electrical applications. The 11-N-1 also features integrated wire stripping and loop making capabilities up to 12 gauge and 9 bit types.
Features a removable jeweler?s carrier which can either be used alone or in conjunction with the 750 series Versa Grip handle; double-ended screwdriver blades provide viable solutions for most fasteners and are easily stored beneath the handle cap. Includes (8) double end bits: (1) #0 x #000 Phillips, (1) #0000 Phillips x 3/64" Slotted, (1) Slotted 1/8? x 5/64", (1) .50" x 1/16" Hex, (1) Hex 5/64" x 3/32", (2) Torx T5 x T8, T6 x T10.
Steel hexagon shank allows a wrench to be used for controlled torque. High-impact acetate handles with comfortable grips and storage. Drives any 1/4" hex shank insert bit also doubles with socket adapter as a hex head screw and nutdriver. Includes: TX10, TX15, TX20, TX25 and TX30 bits.
Cushion-grip handle for greater torque and comfort; end of handle is marked to quickly identify tool; contains: 5/16" and 1/4" nut drivers, #1 and #3 Phillips, 1/4" and 3/16" slotted, T10 and T15 "Torx", #1 and #2 square-recess screwdriver bits; replacement bits are available.
Includes: 1/4 in., 5/16 in., 7/16 in. nut driver, #1 and #2 Phillips bits, 3/16 in. and 9/32 in. slotted bits; unique pin socket on driver handle self-adjusts to a variety of fastener sizes and shape (capacity 1/4 in. to 1/2 in.); quick conversion design allows users to adjust to a T-handle position for increased torque; premium S2 bits for increased durability and less wear.
Powerful magnet built into its shank holds interchangeable bits and also screws; bits store inside handle for quick access. Comfortable handle for easier driving. Includes: 3/16" and 9/32" slotted and No.1 and No.2 Phillips.
Retractable in-handle bit cartridge which stores 7-double ended bits; spring loaded ball bearing system which enables quick bit changes; diversity of bit tips; alloy steel shaft which can also be used as hex driver; EZ-Guide Collar to maintain best alignment between screwdriver and fastener; Palm Saver Cap which elminates painful palm blisters; single-handed use; durable ABS handles which never break; 20-piece display rack which takes up less than one square foot of counter space and can also be wall mounted to conserve on counter space.
Retractable bit cartridge in the handle makes storing, selecting and changing bits quick and easy while saving toolbox space and reducing the risk of lost parts; Palm Saver Cap - the largest cap surface in the hand tools industry - remains stationary while the driver handle turns, preventing blisters and enabling one-handed use; EZ-Guide Collar delivers greater control by maintaining alignment between the screwdriver and the fastener when beginning to tighten a screw; shaft is made of 12T14 alloy steel shaft; handle is made of engineered nylon/ABS; shaft opening serves as 1/4" hex driver. Made in the U.S.A.
Set includes: Vinyl grip multi grip bit driver; (10) SAE nut driver bits: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2; (10) Metric nut driver bits: 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; (10) Torx bits: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30; (3) Robertson bits: 1, 2, 3; (3) Phillips bits: 1, 2, 3; (5) Metric Hex bits: 2.5, 3, 4, 5, 6; (6) SAE Hex bits: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4; (3) Pozi Drive bits: 1, 2, 3; (13) Flat bits: SAE 1/8, 5/32, 3/16, 7/32, 1/4; Metric 3mm, 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm; (5) Tamperproof bits: T10, T15, T20, T25, T27 and (1) Socket Adaptor.
Three way ratcheting mechanism; in-handle storage addtional fastener sizes; sizes included: #1 and #2 Phillips, 1/4" Slotted, T25, #2 Square, 1/4", 5/16" and 3/8" Nut Driver; accepts standard bits; easy to replace lost or misplaced bits.
"QuickLok" shaft; 5"-11" reach; 1" increments; single piece construction; extendable shaft for access to hard to reach areas; includes (8) insert bits: 3/16, 1/4" and 5/16:; Slotted: #1, #2 and #3; Phillips: #1 and #2 Square; power and insert bit compatible.