Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs.
Junction box cover plate. 4 inch.
Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base
Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base, Plunger Terminal
Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets.
Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp
Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp, Plunger Terminal
For use with ETI linkable LED fixtures.
For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed.
For task lighting, single reflector, Includes 5' cord and plug, uses two 40W T12 48 inch fluorescent lamps, not included. UL Listed.
Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts.
Long life fluorescent starter with condenser.
For use in garages, basements, work areas and utility rooms. Features exposed lamps, a single segment reflector. Housing and cover are die-formed of 26 gauge cold rolled steel. 120 volt, 60 hz AC operation. 0 degree Fahrenheit cold start-up. Rotating lock, medium bi-pin lamp holders. Fully assembled with 6' power cord and 3-prong plug. Suspended mounting only with included chain. 3" minimum spacing from ceiling. Uses (2) T8 48" lamps. 49-1/2" length x 6-1/4" width x 2-3/4" depth. Lamps not included. UL Listed.
Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures.
Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint. Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations.
For use with 1 or 2 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except F32T8/ES 60 degrees). UL and CSA Listed.