For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft.
This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified.
Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics. Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Make a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Bonds similar and dissimilar materials as soon as the two surfaces are joined. 700 psi bond strength. Dries amber, sets in 5 minutes.
Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557.
For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified.
Perfect for installing and repairing mosaic, plastic and ceramic tile, and linoleum. Water clean-up.
Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.
Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557.
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01.
Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up.
Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.
Prevents floor squeaks. Adheres to wet and frozen lumber. High strength bond. Meets ASTM D3498 and APA AFG-01.
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead.
Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors.
Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead.
For the repair and installation of concrete, clay, slate or composite type roof tiles on existing roofs. Bonds to most building materials producing a water and weather resistant seal against the elements. Withstands high temperature roof exposure while maintaining its high tensile and shear strength. Easy to use with all "S" type tile and flat type tile applications. Do not use on tar/asphalt impregnated materials. 20 min. at 70 degrees Fahrenheit, 50-percent RH open time, 24 hours cure time, -20 to 180 degrees Fahrenheit service temperature. Mineral spirits or paint thinner, clean up. 1/4" bead covers approx. 32 lin. ft. and a 3/8" bead covers approx. 14 lin. ft.
Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear.
A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified.
For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead.
Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft.
Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white.
Designed for subfloor installations and plywood use. Reduces the amount of nailing and helps eliminate squeaky floors. Fills gaps and irregularities between materials. Not designed for continuous submersion. 100-percent solvent-free and contains no ozone-depleting chemicals. Nonflammable formula with no offensive odor offers freeze/thaw stability and cleans up with water before setting. 10 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead. 89 ft. with 1/4" bead and 39 ft. with 3/8"bead. Passes the requirements of APS's AFG-01 specifications and ASTM C557.