Home > HARDWARE > BUILDERS HARDWARE > HINGES
We found 566 results matching your criteria.
Choose a sub category:
DOOR HINGES BLANK HINGES SPRING HINGES
GRAVITY PIVOT HINGES CONTINUOUS HINGES UTILITY HINGES
STRAP HINGES TEE HINGES / T-HINGE HOOK/STRAP HINGES
Sort By:
Page of 19
HINGE NRW ZINC PLATED 1-1/2IN NARROW HINGES 1-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $0.99
HINGE NRW ZINC PLATED 1IN     NARROW HINGES 1IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $1.19
HINGE NRW ZINC PLATED 1-1/2IN NARROW HINGES 1-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $1.69
T-HINGE ZINC PLATED 2IN       T HINGES 2IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.

Our Price: $1.69
HINGE NRW ZINC PLATED 2-1/2IN NARROW HINGES 2-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $1.99
HINGE STRAP ZINC PLATED 3IN   STRAP HINGES 3IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.

Our Price: $1.99
National Hardware 284BC Flush/Full Inset Light T Hinge T HINGES 3IN ZN PLT

National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel

Our Price: $1.99
HINGE NRW ZINC PLATED 2IN     NARROW HINGES 2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $2.19
T-HINGE ZINC PLATED 4IN       T HINGES 4IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.

Our Price: $2.19
HINGE UTILITY STEEL 2X2IN ZN  ProSource LR-038-PS Full Mortise Square Corner Utility Hinge, 6 Hole, 2 in L x 2 in W Door Leaf, Steel, Zinc Plated

Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.

Our Price: $2.39
HINGE DOOR (HPCE) ZN 3IN      DOOR HINGES 3IN ZINC (HPCE)

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $2.59
HINGE DOOR (HPCE) ZN 3IN      DOOR HINGES 3IN ZINC (HPCE)

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $2.59
Stanley 830226 Door Hinge HINGE DOOR 3IN 5/8 RC BRASS

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.

Our Price: $2.79
Stanley 830229 Door Hinge HINGE DOOR 3IN 1/4RC BRASS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $2.79
Stanley 830232 Door Hinge HINGE DOOR 3IN SQ CNR BRASS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.

Our Price: $2.79
National Hardware SPB512RC Round Corner Door Hinge DOOR HINGES 3IN BRS TONE

National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $2.79
National Hardware N830-268 Square Corner Door Hinge DOOR HINGES 3IN BRS TONE

National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $2.79
HINGE DOOR BRASS TNE 3IN      DOOR HINGES 3IN BRS TONE

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $2.79
HINGE NRW ZINC PLATED 3IN     NARROW HINGES 3IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $2.79
Mintcraft 20347ORX Door Hinge Mintcraft 20347ORX Door Hinge, 6 Hole, 3-1/2 in L x 3-1/2 in W Door Leaf, Steel

2.2mm thickness, 5-knuckle, loose pin.

Our Price: $2.99
Stanley 830224 Door Hinge HINGE DOOR 3-1/2 5/8 RC BRASS

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.

Our Price: $2.99
Stanley 830227 Door Hinge HINGE DOOR 3-1/2IN 1/4RC BRASS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $2.99
Stanley 830230 Door Hinge HINGE DOOR 3-1/2IN SQ CNR BRS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.

Our Price: $2.99
National Hardware N830-260 Round Corner Door Hinge DOOR HINGES 3-1/2IN BRS TONE

National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $2.99
National Hardware N830-263 Round Corner Door Hinge DOOR HINGES 3-1/2IN BRS TONE

National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $2.99
National Hardware N830-266 Square Corner Door Hinge DOOR HINGES 3-1/2IN BRS TONE

National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $2.99
Mintcraft 20347SNX Door Hinge Mintcraft 20347SNX Door Hinge, 6 Hole, 3-1/2 in L x 3-1/2 in W Door Leaf, Steel

2.2mm thickness, 5-knuckle, loose pin.

Our Price: $2.99
HINGE SURFACE PLAIN STEEL 2IN SURFACE HINGES 2IN PLAIN STL

National Hardware Door Hinge, Non-Swaged, Tight Pin, Surface Mount, 70 lb, 2 in Overall Length, Cold-Rolled Steel, For Surface Application

Our Price: $2.99